| No Life Poster
Join Date: Sep 2007 Location: EARTH Age: 42
Posts: 541
Member: 582682
Status: Offline Sonork: 100.1607124 Thanks Meter: 136 | rokea r5570 succesfully
rokea r5570 patten lock successfully repair with volcano thanx for good update its spd 6800H CPU DONE
HERE MY SUCCESS LOG
1) DONE SUCCESS READ CODE
2) READ FLASH
3) WRITE FLASH
4) PHONE RESET
Volcano Updated: 2012-03-14
Connecting...
Connection successful,connected state!
Version: V3.8
SN:001-889-526
Port:COM41
Vcc: null
Gnd: null
Detection initiated, connect the phone and power on it...
Identifying MT...
Identifying SKY...
Identifying SPD...
User stop
Vcc: null
Gnd: 22
Detection initiated, connect the phone and power on it...
Identifying MT...
MT6250/6252, RX: 24, TX: 18
Detection completed with 4.50 seconds!
Available Ports:COM1 COM5 COM7 COM21 COM22 COM28 COM36 COM37 COM41
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 22
Analyzing Rx and Tx...
User stop
Pinouts are not fonud!
Detection initiated, connect the phone and power on it...
Port[COM41]lost or occupied.If it is occupied,please try again after terminate other programs!
Vcc: null
Gnd: 22
Analyzing Rx and Tx...
Port[COM41]lost or occupied.If it is occupied,please try again after terminate other programs!
MT6250/6252, RX: 24, TX: 18
Setting...
Pinouts setting complete!
Setting pinouts...
Pinout setting complete.
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 22
Analyzing Rx and Tx...
MT6250/6252, RX: 24, TX: 18
Setting...
Pinouts setting complete!
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 22
Analyzing Rx and Tx...
MT6250/6252, RX: 24, TX: 18
Setting...
Waiting for phone's response,please press Power on/off button.
Connecting...
Hardware version:CA04
Software version:0100
CPU TYPE:6250
Internal version:8B00
Connecting, please hold on the power key...
Formatting completed
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: 7
Gnd: 2
Detection initiated...
D+ = 6, D- = 8
Detection D+/D- with 4.53 seconds!
Continue to detect BOOT pin...
Available Ports:COM1 COM5 COM7 COM21 COM22 COM28 COM34 COM35 COM36 COM37
The file is empty,please check it!
The file is empty,please check it!
User stop
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: 7
Gnd: 2
Detection initiated...
D+ = 6, D- = 8
Detection D+/D- with 4.53 seconds!
Continue to detect BOOT pin...
User stop
Setting pinouts...
Pinout setting complete.
Detection initiated...
Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.53 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Boot downloaded.
Please change Boot or reduce Baudrate, try it again.
The file is empty,please check it!
Setting pinouts...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
The file is empty,please check it!
Pinout setting complete.
The file is empty,please check it!
Setting pinouts...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
The file is empty,please check it!
Pinout setting complete.
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: 7
Gnd: 2
Detection initiated...
D+ = 6, D- = 8
Detection D+/D- with 4.55 seconds!
Continue to detect BOOT pin...
User stop
Setting pinouts...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
The file is empty,please check it!
Pinout setting complete.
Reset USB device and search it...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
Adding the cable's title...
Cable title added successfully.
The file is empty,please check it!
The file is empty,please check it!
The file is empty,please check it!
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: 7
Gnd: 2
Detection initiated...
Found: D+ = 6, D- = 8
Detection D+/D- with 4.53 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Detection completed.
Setting pinouts...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
The file is empty,please check it!
Pinout setting complete.
Waiting for phone's response, press the Power on the phone...
Please change Boot or reduce Baudrate, try it again.
Detection initiated...
Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.55 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Boot downloaded.
Please change Boot or reduce Baudrate, try it again.
When R/W IMEI is COM, Detect Type should select 6600(COM) or 8800(COM)
Detection initiated...
Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.53 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
The 1st boot failure,Please reduce Baud-rate and try again!
Please change Boot or reduce Baudrate, try it again.
Detection initiated...
Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.53 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
The 1st boot failure,Please reduce Baud-rate and try again!
Please change Boot or reduce Baudrate, try it again.
Detection initiated...
Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.53 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Boot fileSpreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC6800H [68000000]
Flash ID: 00AD0076
Flash Type:[Hyundai] HY27XS08121A/M/HYC0UEE0MF2P-6SH0E
FLASH LEN:0x4000000
--------------------------------------.
Phone imei lists.
IMEI1:352642047658920
IMEI2:352642047658938
IMEI3:358570010103893
Read Info finish.
The file is empty,please check it!
Detection initiated...
Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.53 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
Pinouts setting complete!
Temporary does not support this guide to read the reset function
Detection initiated...
Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.53 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Boot fileSpreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC6800H [68000000]
Flash ID: 00AD0076
Flash Type:[Hyundai] HY27XS08121A/M/HYC0UEE0MF2P-6SH0E
FLASH LEN:0x4000000
Reading completed.
Read time: 3 min 27 s
The data has been saved in I:\volcanobox\spd\rokea manojbhai\MOCOR_PDA_1.2_Release_20120315_153442_Fu llFlash.bin, size: 66 M.
Failes to open the file!
Simple search:
[privacy lock]:9
[privacy lock]:1234
[phone lock]:1234
Looking for passwords,please wait...
[Privacy Lock] 1234
Looking for passwords complete.
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
Failed to detect.
Pinouts are not fonud!
Setting pinouts...
Pinout setting complete.
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
Failed to detect.
Pinouts are not fonud!
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: null
Gnd: null
Detection initiated...
Failed to detect.
Clearing pinouts...
Clearing pinouts complete!
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: 18 23
Gnd: null
Detection initiated...
User stop
C:\Program Files\FuriouS TeaM\VolcanoBox\PrtScn\PIC_2012_03_15_3_45_24_PM.j pg saved.
Detection initiated...
Vcc: 18
Gnd: 23
Analyzing D+ and D-...
Failed to detect.
Pinouts are not fonud!
Detection initiated...
Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.53 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Boot fileSpreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC6800H [68000000]
Flash ID: 00AD0076
Flash Type:[Hyundai] HY27XS08121A/M/HYC0UEE0MF2P-6SH0E
Set to Factory successfully.
Detection initiated...
Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.53 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
Pinouts setting complete!
The file loaded is not integral,it can not be used to write full flash.Please backup before write!
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Boot fileSpreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC6800H [68000000]
Flash ID: 00AD0076
Flash Type:[Hyundai] HY27XS08121A/M/HYC0UEE0MF2P-6SH0E
FLASH LEN:0x4000000
Writing completed.
Flash file I:\volcanobox\spd\rokea manojbhai\MOCOR_PDA_1.2_Release_20120315_153442_Fu llFlash.bin has been written.
>>Ready to read/write again, please remove the clip or battery and then re-loaded it. |