View Single Post
Old 03-19-2012, 15:16   #7 (permalink)
realmadrid
Freak Poster
 
realmadrid's Avatar
 
Join Date: Nov 2005
Location: in the heaven
Posts: 484
Member: 201648
Status: Offline
Thanks Meter: 19
MCU Nokia Version: 1.132, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Initializing flasher...
Initializing
Scanning image files...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
Waiting for USB device...
Waiting for USB device...
Loading secondary boot code: 14592 bytes
Secondary boot loaded
Loading update server code: 300160 bytes
Update server loaded
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Scanning image files...
Asic CMT: Start programming 29095 KB...
Asic CMT: Erasing rm635__10.10.mcusw
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing area 4...
Asic CMT: Erasing area 5...
Asic CMT: Erasing area 6...
Asic CMT: Erasing rm635__10.10.ppm_ae
Asic CMT: Erasing area 1...
Asic CMT: Erasing rm635__10.10.image_ae_silver_fr
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Programming rm635__10.10.mcusw
ADL LDR: Error sending ADL_LDR_WRITE_DATA_REQ size 0xC000
ADL LDR: Error sending write message...
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Error writing to target address 0x01398400, Size 0x0000C000
Asic CMT: ERROR Programming rm635__10.10.mcusw Block 38. Unable to continue flashing.
Asic CMT: Error in sending data from rm635__10.10.mcusw.
Protocol 1: Error during Flashing. Unable to continue.
Unable to flash phone 0x84012283
--------------------------------------------------------------------------------
TBB5USBFlashThread 2.9.7.2928 finished at: 2012/03/19 15:14:33

Terminated with error: Firmware: Firmware updating failed. Error 0x84012283 - Flash: Critical error while programming CMT data. Flashing operation aborted [00010123]
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UBEA9XDB]
any solution ???
  Reply With Quote
 
Page generated in 0.14151 seconds with 6 queries