| Log MCNBOX use rj 45 cable
Welcome to use McnBox!
Selected COM3
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2010xxxxxx
Firmware V1.15
Checksum 04BC-24BE
Software V3.27
Box Connected!
Ready working at COM3
-------------------------------
Start Scanning...
->.......
Results:
MTK Chipset CPU: MT6268.
GND:1,RXD:4,TXD:3
[G:1 R:4 T:3] Apply to Box
[G:1 R:4 T:3] Apply to Box
The File Information:
TINNO68_09B_PCB01_UMTS_MT6268_S01.NX-W755_EW590_01_VER_001_13.BIN_FLNH8BCS0QG0MBP_56M_C
>>
The File Information:
TINNO68_09B_PCB01_UMTS_MT6268_S01.NX-W755_EW590_01_VER_001_13.BIN_FLNH8BCS0QG0MBP_56M_C
>>
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6268 Ver: 8B01 SW:8B01
Initialize Boot7 ...
Flash(Nand) Type [HYNIX] HYD0SQG0MF1P
Flash(Nand) Code 00AD00B1(00800055)
Flash(Nand) Size 0x08400000 Hex Bytes
Nand Head SET ERROR
phone bad? Please send the file to us
Last edited by Mcnbox; 03-24-2012 at 12:13.
Reason: S/N edited
|