View Single Post
Old 03-26-2012, 19:59   #5 (permalink)
alexz702
Banned
 
Join Date: Nov 2010
Posts: 158
Member: 1439005
Status: Offline
Sonork: alexz702
Thanks Meter: 11
Welcome to Octopus Box Samsung software version 1.3.1
-----------------------------------------------------------------------------------
To connect SGH-T989 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in Octopus Samsung software.
Selected firmware file: T989UVKL1_T989UVKL1_TMB.oct
Please put your phone in download mode and connect to PC.
To put SGH-T989 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume-" +"Power" buttons.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing MDM section...
MDM section has been written successfully.
Firmware writing successfully completed.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM13
Selected model: SGH-T989
Port is busy
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM27
Phone connection failed
Connecting to phone on COM26
Phone connection failed
Connecting to phone on COM28
Mode: Normal
Phone model: AAABQOCZ
Phone model is not supported
Phone connection failed
No diagnostic ports found!
-----------------------------------------------------------------------------------
To connect SGH-T989 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SGH-T989
Mode: Emergency
Write IMEI failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM26
Selected model: SGH-T989
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM27
Phone connection failed
Connecting to phone on COM26
Phone connection failed
Connecting to phone on COM28
Mode: Normal
Phone model: AAABQOCZ
Phone model is not supported
Phone connection failed
No diagnostic ports found!
Selected action can’t be performed
-----------------------------------------------------------------------------------
To connect SGH-T989 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM26
Selected model: SGH-T989
Start repaire efs
To put SGH-T989 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume-" +"Power" buttons.
Repairing EFS:
Searching phone...
Phone found
EFS Repaire successfully
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM13
Selected model: SGH-T989
Port is busy
Mode: Emergency
Write IMEI failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM27
Selected model: SGH-T989
Mode: Emergency
Write IMEI failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM26
Selected model: SGH-T989
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM27
Phone connection failed
Connecting to phone on COM26
Phone connection failed
Connecting to phone on COM28
Mode: Normal
Phone model: AAABQOCZ
Phone model is not supported
Phone connection failed
No diagnostic ports found!
Selected action can’t be performed
  Reply With Quote
 
Page generated in 0.14040 seconds with 6 queries