To connect SGH-T499 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in Octopus Samsung software.
Selected firmware file: T499UVKE4-T499UVKE4-T499UVKE4.oct
Please put your phone in download mode and connect to PC.
To put SGH-T499 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume-" +"Power" buttons.
Searching for phone. Please wait...
Found phone on
Firmware write started.
Writing amss section...
amss section has been written successfully.
Writing boot.img section...
boot.img section has been written successfully.
Writing recovery.img section...
recovery.img section has been written successfully.
Writing system.rfs section...
system.rfs section has been written successfully.
Writing csc.rfs section...
csc.rfs section has been written successfully.
Please, restart phone to apply changes
Firmware writing successfully completed.
BUT PHONE STILL BLINKING............... |