| i found bug for spd 6610 for phone Movi B3 here is log :
using boot 10
Welcome to use McnBox!
Selected COM3 COM4
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2008xxxxxxxxx
Firmware V1.15
Checksum 902B-B3BE
Software V3.27
Box Connected!
Ready working at COM3
Connecting, wait...
Port error, Occupied or non-exist!
Press and Holding Power button now !
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot10...
CPU Info 6610
Flash Type NOR
Flash ID 00C80040(00170000)
Flash Model GD25Q64
Flash Size 0x800000(8.0M)
Start Reading...
Read Done!
File saved: C:\Documents and Settings\ton2\My Documents\6610_GD25Q64.bin
File not for SPD
when i open the backup file , get this message 'File not for SPD'
And when i try to read the phonelock here is log :
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot10...
CPU Info 6610
Flash Type NOR
Flash ID 00C80040(00170000)
Flash Model GD25Q64
Flash Size 0x800000(8.0M)
Check firmware,Wait...
No Code found
I also try to Factory Reset using boot 10 but cant solve, the phone still locked.
Boot 10 can't do nothing good for this spd 6610 !!!
but here is another log using boot 9 :
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot9...
CPU Info 6610
Flash Type NOR
Flash ID E59FF018(E59FF018)
Flash Model UNKNOWN
Flash Size 0x1000000(16.0M)
Start Reading...
Read Done!
File saved: C:\Documents and Settings\ton2\My Documents\6610_UNKNOWN.bin
when i open the backup file , no message like above.
The backup file maybe good but see the 'Flash Model UNKNOWN'? I won't flash back the file with this log.
and the flash size are different !
But luckily boot 9 succeeds to read the code , log :
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot9...
CPU Info 6610
Flash Type NOR
Flash ID E59FF018(E59FF018)
Flash Model UNKNOWN
Flash Size 0x1000000(16.0M)
Check firmware,Wait...
Unlock Code: 171922
Privacy Code: 171922
Mcn team please solve the problem of this SPD chip, because some users here have posted reports
for dead phone if they format this spd 6610 with boot 10 and can't revive the phone if they use the backup file (with message 'File not for SPD')
best regards |