i9020 DEAD after FLASH pls HELP! Welcome to Octopus Box Samsung software version 1.3.6
-----------------------------------------------------------------------------------
To connect GT-I9020 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM9
Selected model: GT-I9020
Searching for phone. Please wait...
Phone found.
Firmware compiled date: 2011. 02. 24. (목) 18:49:02 KST
Phone IMEI: 355266040419077
Android version: 2.4 (GINGERBREAD)
Selected firmware file: I9020XXJK1- GRH78.oct
Please put your phone in download mode and connect to PC.
To put GT-I9020 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume+" +"Volume-" buttons.
3. Insert usb cable.
Found phone on
Firmware write started.
Writing IPBL section...
IPBL section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing USERDATA section...
USERDATA section has been written successfully.
Writing DGS section...
DGS section has been written successfully.
Firmware writing successfully completed.
now phone cant detect my PC and other laptop
how to fix this phone? |