[Mcnbox]

Originally Posted by sandulxxx

try format mstar chipset
read ok but auto format error

Welcome to use McnBox!
Selected COM21
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2010xxxxxxxxx
Firmware V1.15
Checksum 3385-1DBE
Software V3.29
Box Connected!
Ready working at COM21
Finder Testing ...
PWL Testing ...
Chip Testing ...
Clamps Testing ...
Test Finished!
Scanning pin status,please waiting...
->
Pin-status Scan Done
Scanning,waiting...
->
Operation done, Pin detect out.
BOOT : 4  USB D-: 2   USB D+: 3   Mstar MSW853X
Total expend 63 seconds
[G:5 D-:2 D+:3 Down:4] Apply to Box
If Scan other phone, please click [Stop]
Connecting, wait...
Phone Connected!
Initialize boot4...
Boot Error. ID: 1015
Connecting, wait...
Phone Connected!
Initialize boot6...
Boot Done.
Flash Type NOR
Flash ID 00011001
Flash Model SPANSION_S71GL064NB0
Flash Size 0x800000(8.0M)
Start Reading...
Read Done!
File saved: C:\Documents and Settings\blues\My Documents\Mstar_SPANSION_S71GL064NB0.bin
Connecting, wait...
Phone Connected!
Initialize boot6...
Boot Done.
Flash Type NOR
Flash ID 00011001
Flash Model SPANSION_S71GL064NB0
Flash Size 0x800000(8.0M)
Erase Flash Error. ID: 1075

Originally Posted by wiro_cool

What's new for Mcnpro box version 3.2.9 ?


    * Improved MTK 6573/6516/6513 read /write
    * Fix Nor flash write bugs for boot6
    * Improved MTK USB Pin-find function
    * Improved Spreadtrum 6800H read /write
    * Add support Spreadtrum 880xG
    * Spreadtrum new Flash ICs added
    * Fix Mstar read /write bugs
    * Other small report bugs fixed

At this Moment,i Think MCN not Support Auto Format for Mstar Chipset.Just Support Read and Write.so,try Write with Normal Firmware and Choose Boot 3

Mstar support auto format, this case becos some special flash IC, we will try to fix in next version !


Best regards !

Mcnbox