Quote:
Originally Posted by deepakgarg bro use standard unlock fast method
this phone based on mtk6205 which is unable to enter meta mode |
As per your method it works perfectly
Here is the log
COM5 [ProlificSerial2] selected
module v4.28
Device: Airtel-Cordless-FGD8900
Checking data, wait...
advanced flash detection enabled
Action: "sp-unlock"
Warning ! After unlock process finished make this:
1. be sure that there is NO any SIM card in phone
2. press phone "Power" button and power-On phone
3. press phone "Power" button and power-Off phone
4. NOTE ! SIM card can be blocked during first power-On so use SIM card
that you ready to move to trash w/o problems !
5. now you can power-On phone with SIM card
Do you understand instruction and want to continue ?
unlock method: standard fast
Unlock procedure can be faster if you skip ffs/eeprom area backup procedure.
Do you want to disable ffs/eeprom backup ?
ffs/eeprom backup disabled
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6205:8B00]...
CPU: MT6205
high speed boot On
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 01227E220A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0008x002000 003Ex010000 0008x002000] 4Mb
otp offset: 00000000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
interesting cpu type found
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
.
search rom info finished
searching rom info...
.
search rom info finished
warning: rom info information not found, possible reasons:
- old firmware type w/o rom info information
- empty (completely or partially erased) flash chip
- damaged firmware
- damaged hardware (bad soldered or damaged flash chip)
> if phone works fine just ignore this warning <
ffs/eeprom address can not be detected, value from database assigned: 00380000/00080000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
flash: 01227E220A2201:18E59F00000000
Backup required data Done
====> Patch required data ...
......
lock area found
......
lock area found
Patch required data Done
====> Special operation ...
detecting parameters to apply patch area 1...
......
required data found
flash: 01227E220A2201:18E59F00000000
flash: 01227E220A2201:18E59F00000000
Write: area 1 (pass 1)
required data found
flash: 01227E220A2201:18E59F00000000
flash: 01227E220A2201:18E59F00000000
Write: area 1 (pass 2)
..........
area 1 patch applied Ok
Special operation Done
====> Write ...
flash: 01227E220A2201:18E59F00000000
flash: 01227E220A2201:18E59F00000000
Write: lock-area-1
flash: 01227E220A2201:18E59F00000000
flash: 01227E220A2201:18E59F00000000
Write: lock-area-2
Write Done
====> Finalization ...
Finalization Done
Finished, time used: 27 sec
Remove/Install battery now !
Infinity box rocks