06-15-2012, 05:04
|
#2 (permalink)
|
No Life Poster
Join Date: Mar 2009 Location: YT - Channel RealFix-GRS.TV Age: 36
Posts: 2,494
Member: 990711
Status: Offline
Sonork: 100.1597405 Thanks Meter: 1,778 | Resurrection logs here Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]
Connecting to the dead body...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is 1 MHz
Detected dead body ID: 0x202400E1
| Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]
Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is 1 MHz
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x202400E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits
| Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]
Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Wrong response code from the RIFF Box: 0x45
| Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]
Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is 1 MHz
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.
| |
| |