GSM-Forum - View Single Post

Microse · 06-16-2012, 07:04

Hi bro just follow this link and u done. Read instructions clearly. Use thanks button when done.
http://rapidshare.com/files/95890081...ocker.zip.html

Instructions
============
1. Make sure you installed HardSPL 1.15 MFG If you did not install 1.15 yet follow instructions here: Nike SSPL, USPL and HardSPL - xda-developers
To verify if HardSPL is correctly installed: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.15.Hard" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.

2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.58.16.27"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here:
[28.07.08] Nike and Neon Radios - xda-developers
EDIT: if your current radio version is 1.65.28.25 or higher you should first downgrade to a lower ROM version like RUU_Nike_Radio_1.58.21.23_25.65.30.04S_Modded.

3. Connect PC and Niki with a USB cable and keep it connected until the last step.

4. Power on the Niki and let it boot into Windows Mobile. On the PC make sure the activesync icon is green.

5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run NikiCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished. IMPORTANT: Make sure that the flash correctly finished. The device will restart automatically once the flashing is completed.

6a. Power off and power on in tri-color bootloader mode.
6b. Unplug and replug usb cable and wait 10 seconds

7a. right-click activeync icon and uncheck "Allow USB connections" from Connection Settings
7b. On your PC go into the "step2" directory and run "Niki-supercid.exe".

You should see this:
--------------------
=== Niki SuperCID and Security Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]

[] Done, your device should now be superCID and Security Unlocked
[] Your device is unlocked and you can change anything anytime
[] Don't forget to flash your original radio

Press Enter to exit
-------------------

06-16-2012, 07:04	#2 (permalink)
Microse Freak Poster Join Date: Feb 2006 Posts: 128 Member: 234339 Status: Offline Thanks Meter: 19	Hi bro just follow this link and u done. Read instructions clearly. Use thanks button when done. http://rapidshare.com/files/95890081...ocker.zip.html Instructions ============ 1. Make sure you installed HardSPL 1.15 MFG If you did not install 1.15 yet follow instructions here: Nike SSPL, USPL and HardSPL - xda-developers To verify if HardSPL is correctly installed: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.15.Hard" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus. 2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.58.16.27"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here: [28.07.08] Nike and Neon Radios - xda-developers EDIT: if your current radio version is 1.65.28.25 or higher you should first downgrade to a lower ROM version like RUU_Nike_Radio_1.58.21.23_25.65.30.04S_Modded. 3. Connect PC and Niki with a USB cable and keep it connected until the last step. 4. Power on the Niki and let it boot into Windows Mobile. On the PC make sure the activesync icon is green. 5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run NikiCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished. IMPORTANT: Make sure that the flash correctly finished. The device will restart automatically once the flashing is completed. 6a. Power off and power on in tri-color bootloader mode. 6b. Unplug and replug usb cable and wait 10 seconds 7a. right-click activeync icon and uncheck "Allow USB connections" from Connection Settings 7b. On your PC go into the "step2" directory and run "Niki-supercid.exe". You should see this: -------------------- === Niki SuperCID and Security Unlocker (c)2008 by jockyw2001 === Donations happily accepted, paypal to [email protected] [] Done, your device should now be superCID and Security Unlocked [] Your device is unlocked and you can change anything anytime [] Don't forget to flash your original radio Press Enter to exit -------------------