06-17-2012, 03:14
|
#6 (permalink)
|
No Life Poster
Join Date: Mar 2009 Location: YT - Channel RealFix-GRS.TV Age: 36
Posts: 2,494
Member: 990711
Status: Online
Sonork: 100.1597405 Thanks Meter: 1,778 | Quote:
Originally Posted by legija | Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]
Connecting to the dead body...OK
Detected dead body ID: 0x000000E1 - IGNORED!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x37010000000000000000008000000000
Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x44): Communication is not established. Terminating.
| Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]
Connecting to the dead body...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Detected dead body ID: 0x000000E1
| Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]
Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x000000E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits
|
help sir ........................... |
| |