[..::Gsmideazone::..]

Originally Posted by abhishek1

my lephone c1 come to my shop when i start it it hang on lephone logo. i flash it with CPU: 66007001 Flash: NOR_ST_M58WR064KT but set gone in dead condition. before flash i read info the log is here -------------------Created: 7/12/2012 11:54:22 AM-------------------

Chip=SpreadTrum
Action=Reset
FlashType=NOR
boot=6600L/WT6226/6610/6620
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM10
Baudrate=921600

CPU_Type=SC6600L2
CPU_ID=66007001
NOR_ID=002088C0002088C0
NOR_Size=8MB
NOR_Name=NOR_ST_M58WR064HU
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=

Initializing...
DA_LIB_VER_4.3.6.8
It is sensing the pinout fast...
RXD=11 TXD=3
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100006A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064HU
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done. after flash with CPU: 66007001 Flash: NOR_ST_M58WR064KT log is here -------------------Created: 7/12/2012 1:28:11 PM-------------------

Chip=MTK
Action=Format
FlashType=NOR
boot=Ver5.1152
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM10
Baudrate=921600

CPU_Type=MT6253
CPU_ID=0000000F
NOR_ID=00EC240400000000
NOR_Size=16MB
NOR_Name=[SAMSUNG] K5N2833ATB
NOR_DieCnt=
NAND_ID=0000000000000000
NAND_Size=0MB
NAND_Name=Nand:N/A

Initializing...
DA_LIB_VER_4.3.6.8
It is sensing the pinout fast,please hold on the phone Power key
RXD=22 TXD=21
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC240400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: G609RC_F.05.101108
Changing baudrate to 921600...
Done. but now set is dead plz help me

check both log first

1.spd log
2.mtk log