[vignesharmy55]

i have one mobile with contact service problem i flash with best but problem same any one advoice ME thx u

here log:

card found: S/N xxxxxxxxxx
registered to: vigneshkumar

Connect phone on selected interface...

Core : v1.47 , FlashEngine : v1.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm775__07.32.mcusw
PPM : rm775__07.32.ppm_a
CNT : rm775__07.32.image_a_059H5W8_004
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     14F0010AB09C0344A1B896076B3A3051DE8C53A5
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
2nd boot not accepted... Alive Request not done :(
Boot error... :(

->  Boot fail...
    Flashing failed...

Phone disconected!

Connect phone on selected interface...

Core : v1.47 , FlashEngine : v1.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm702__07.31.mcusw
PPM : rm702__07.31.ppm_sn
CNT : rm702__07.31.image_sn_059L5S5
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.46_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 358639040841168
IMEI 2 : 358639040841176
PCcode : 059D464

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\358639040841168_358639040841176_XG213_CRT.rpl


   ===Flashing [MCU]===
File : rm702__07.31.mcusw
Image : rm702__07.31.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:05 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01B40000
Erasing, wait ... 
Erase done, time : 00:02:33 
Write , Start : 0x40280000 , Len : 0x01AC0000
Flashing , wait ...
Region flash done, time : 00:00:41
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip

   ===Flashing [PPM]===
File : rm702__07.31.ppm_sn
Image : package_sn.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41DC0000 , Len : 0x00700000
Erasing, wait ... 
Erase done, time : 00:00:27 
Write , Start : 0x41DC0000 , Len : 0x0047A400
Flashing , wait ...
Region flash done, time : 00:00:05

   ===Flashing [CNT]===
File : rm702__07.31.image_sn_059L5S5
Image : package_sn_059L5S5.image.fls
Cert block found, sending....
Cert sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x424C0000 , Len : 0x01960000
Erasing, wait ... 
Erase done, time : 00:03:00 
Write , Start : 0x424C0000 , Len : 0x00AE0000
Flashing , wait ...
Region flash done, time : 00:00:14
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:05 
No write data, skip

Flashing done!
Total flash time : 00:07:17
Reboot phone now...

Reading Phone Info....
Connected phone -   C2-03
Software Info:     V 07.31 12-01-12 RM-702 (c) Nokia            
IMEI:  358639040841168
PPM version :   V 07.31 12-01-12 RM-702 (c) Nokia             SN
Product code:  059P4Z7
Checking...
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 42 certs
Data exist, skip certificate repair...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:08:08
Connect phone on selected interface...