com164 [vcp0] selected
module v3.75
device: Huawei-g6600
checking data, wait...
Action: Read/check information
interface: Brom_dll_v3.1016.00
connect...
Phone should be switched off !
Press and hold power button now !
Connecting...
Booting...
Release power button now !
Bootcode current/expected: 3.2/3.2
cpu: 6235:8c00:8a00
status: Ff
bbchip bl ver: Fe
nor flash chip: Not installed
nand flash id[0053]: 00ad:00a100000015 [hynix] h8bcs0pg0mbp
chip size: 128mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal ram size: 00010000
external ram: S_da_ram_error
done
set baudrate (115200)...
Done
interesting cpu type found: 6235:8c00:8a00
ram test...
Testing...
Ram test passed
===> detect existing firmware structure...
Detect ffs...
Ffs offset/size: 02000000/06000000
firmware size: 32mb
ffs size: 96mb
detect sec ro...
Detect custom parameters...
Detect project-id...
Project-id: E5.2av02v01.02
detect nand info...
Number of areas/bytes to read: 1:001a0000
reading (hw_storage_nand nutl_read_page_only)...
Nfi area detection...
Warning: Core offset is not detected
nfi area detection (0 cores) finished: Failed
warning: Ffs can not be detected
tcl-id detection...
Tcl-id detection done
startup code area #1 detection...
Startup code area #1 detection done
rom info ver: 07
sw version: Byd35_09a_pcb01_gprs_mt6235b_s01.e5_2av02v01_02.bi n
project-id: E5.2av02v01.02, 00000000
code offset: 00000000
rom info structure: [standard] type (07)
tcl-id is absent
===> done
====================
new firmware found (v.3.75, database date: 12.02.2011):
Byd35_09a_pcb01_gprs_mt6235b_s01.e5_2av02v01_02.bi n
this firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "read full flash" operation
- send flash backup files to support:
[email protected] or upload files to
rapidshare ? Secure data logistics or
4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
disconnect...
Done
finished, time used: 5 min 44 sec
remove/install battery now !