Quote:
Originally Posted by najegsm UBTool Rev1.0.6 By ASAN-GSM TEAM
---------------------------------------------
Important Note:
Before Using This Tool Check and Be Sure :
1) Your Phone Has Complete ROOT Access
2) Your Phone Must be in AirPlane Mode
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing Red Method ...OK
Reading EFS ...OK
Analyzing EFS ...OK
Restoring EFS ...OK
Finalizing ...OK
Phone Reset Done!
Operation Completed
Operation Time: 00:00:37
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing BLUE Method ...OK
Reading NV DATA ...OK
Analyzing NV DATA ...OK
Restoring NV DATA ...OK
Finalizing ...OK
Phone Reset Done!
Operation Completed
Operation Time: 00:00:12
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing GREEN Method ...OK
STEP1 ... OK
STEP2 ... OK
Phone Reset Done!
Operation Completed
Operation Time: 00:00:13
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing BROWN Method ...OK
STEP1 ... OK
STEP2 ... OK
Phone Reset Done!
Operation Completed
Operation Time: 00:00:14
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing BLACK Method ...OK
Model : GT-I9100
Serial No. : NULL
Baseband Version : NULL
GSM Baseband Version : NULL
Bootloader Version : unknown
Build Version : 2.3.3
Repairing EFS ... OK
Phone Reset Done!
Operation Completed
Operation Time: 00:00:14
not done !!!!!!!!!!!!!! |
Dont worry Jast Flash Phone This firmware And After Change IMEI 100% Tested Mor time
I9100XWKE2_I9100XXKDJ_I9100OXXKE2
Android ver 2.3.3
http://flashmirrors.com/download.php...iles/nrr1y0fgc https://rapidshare.com/#!download|72...rar|337464|0|0