4SE - tool 1.8.8 (S/N:000000000xxx)
Selected model: W200
Selected operation: Flash
Selected interface: UART (BOOTROM)
Remove battery, wait a few seconds and insert it back
Connect cable and press "Power" button shortly
Connected to COM16
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...OK
Sending Preloader...OK
Starting GDFS service...OK
Reading GDFS security data...OK
Chip
B2012 Model:W200i IMEI:35165302-015488-7 CID:52 Domain:RED
OTP LOCKED:1 CID:51 PAF:1
Uploading logic DB2012:
Detecting flash type...OK
ID: 897E (Intel)
Chip: Intel Sibley 512 Mbit NOR
Logical address: 0x44000000
Size: 64 Mb
Shutting down device...OK
Remove battery, wait a few seconds and insert it back
Connect cable and press "Power" button shortly
Connected to COM16
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...OK
Uploading logic DB2012:
Sending ResetLoader...OK
Authenticating with key KIDP96201233...OK
Reseting to factory defaults...OK
Shutting down device...OK
Remove battery, wait a few seconds and insert it back
Connect cable and press "Power" button shortly
Connected to COM16
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...OK
Uploading logic DB2012:
Sending ProductionLoader...OK
Writing EROM...OK
W200i CID52 Red (R4JA011 | CDA102737/4) GENERIC GREECE & BALKAN
Flashing 275277757_0114D5A55948.SOFTWARE (318 blocks)...OK
Flashing 275277577_0114D5F57130.SOFTWARE (125 blocks)...OK
Flashing 275284612_011197A6DD18.SOFTWARE (4 blocks)...OK
Sending ExplorerLoader...OK
Starting filesystem service...OK
Uploading 275299897_0111A3331610.FILE_SET (8 files)...OK
Shutting down device...OK
Remove battery, wait a few seconds and insert it back
Connect cable and press "Power" button shortly
Connected to COM16
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...OK
Uploading logic DB2012:
Sending ProductionLoader...OK
Sending CertLoader...OK
Changing certificate to A1_DB2010_52_RED...OK
Shutting down device...OK
Operation completed successfully. You can disconnect the phone now
FINISHED [520sec]