4SE - tool 1.8.9 (S/N:000000000xxx)
Selected model: W580
Selected operation: Unlock
Selected interface: USB (BOOTROM)
Checking USB driver status...OK (SEMC Flash Device v3.0.0.0 | 11-25-2011)
Remove battery, wait a few seconds and insert it back
Plug USB cable holding both "2" and "5" buttons
Connected to USB1
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...OK
Sending Preloader...OK
Starting GDFS service...OK
Reading GDFS security data...OK
Chip
B2020 Model:W580i IMEI:35714301-165440-4 CID:53 Domain:RED
OTP LOCKED:1 CID:51 PAF:1
Uploading logic DB2020:
Detecting flash type...OK
ID: 897E (Intel)
Chip: Intel Sibley 512 Mbit NOR
Logical address: 0x44000000
Size: 64 Mb
Shutting down device...OK
Remove battery, wait a few seconds and insert it back
Plug USB cable holding both "2" and "5" buttons
Connected to USB1
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...OK
Uploading logic DB2020:
Sending ResetLoader...OK
Authenticating with key KIDP96202033...OK
Reseting to factory defaults...OK
Shutting down device...OK
Remove battery, wait a few seconds and insert it back
Plug USB cable holding both "2" and "5" buttons
Connected to USB1
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...OK
Uploading logic DB2020:
Sending ProductionLoader...OK
Writing EROM...OK
Writing SIMLock data...OK
Changing certificate to A1_DB2020_53_RED...OK
Shutting down device...OK
Operation completed successfully. You can disconnect the phone now
FINISHED [41sec]