| now i try read anlysis security but appear this..
Started Phone Security Analysis...
[Nokia 2710 Navigation Edition USB Phonet]: Port opened OK!
MCU Version V 09.16
MCU Date 11-01-11
Product RM-586 (Nokia 2710c-2)
Manufacturer (c) Nokia
IMEI 355959041732999
Mastercode 511710474
Reading Security Block...
Security block OK and saved to "RM-586_355959041732999_12082012_201835.SecurityBlock. PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
-- SECURITY PROBLEM --
Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED!
To repair it, simply slick "SX4 Authorization / SD Repair" button.
After SX4/SD Repair, don't forget to write PM file with fields 1,309 (if SW don't do this automatically)
Additionaly, Checking HWC/CCC Certs...
Booting CMT...
[Nokia 2710 Navigation Edition USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
New ROM Detected
CMT_SYSTEM_ASIC_ID: 000000000000000022000509200C0000
CMT_EM_ASIC_ID: 00005361
CMT_PUBLIC_ID: 00000000009725EB297C238CC4703E0288635336
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 1B0D74C532CA1C6133940C740E8C786E
CMT_BOOT_ROM_CRC: DE56D582
CMT_SECURE_ROM_CRC: BDDE7A3A
CMT Ready!
Searching for BootCode: DualLine 32Bit
BCM21351_usb2nd.fg, Type: 2nd Boot Loader, Rev: 513.12.8.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000431, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
BCM21351_XSR16_usbalg.fg, Type: Algorithm, Rev: 513.12.8.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 84CDC75F79F52BBAE46EA3A70C9240861412C480
APE Subsystem Not Found
HWC Looks OK!
CCC Looks OK!
Restarting MCU...
-- SECURITY PROBLEM --
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Analyze Security Error -> Phone not detected
now i try reapair super dongle ...
Nokia 2710 Navigation Edition USB Phonet]: Port opened OK!
SX4 Authorization / SD Repair Procedure Started....
[Nokia 2710 Navigation Edition USB Phonet]: Port opened OK!
Failed to obtain Phone Unique Data, Will use Server and Original Card
[Nokia 2710 Navigation Edition USB Phonet]: Port opened OK!
MCU Version V 09.16
MCU Date 11-01-11
Product RM-586 (Nokia 2710c-2)
Manufacturer (c) Nokia
IMEI 355959041732999
Mastercode 511710474
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Cyclone Server (2.0.0.44), Cyclone Box Team 2008-2012 - Ready.
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Found, writing...
[Nokia 2710 Navigation Edition USB Phonet]: Port opened OK!
[1,0] Written, Length: 9130 bytes, Status: OK
Write PM Finished, Record written OK: 1, Record written NOT OK: 0
Disconnected from Cyclone Server
but the same problem contact service... helpme please |