| Error flash c5-03.2
I have error in flash, phone problem: only vibrate but no power
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-719_20.1.024_prd.core.C00 (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 0ED001119BDB034444B877F5CA70E473867E2C8D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
RM-719_20.1.024_prd.core.C00, Type: Flash Image, Algo: XSR 1.6, BB5
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.11.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
Processing Flash Image Failed ->
The ROM Refused to start Secondary Loader. Common Reasons:
1. Battery voltage is too low.
2. Transmission error occured. Usually happens when You put battery on while USB cable plugged. Try unplug USB cable, re-insert battery, plug USB Cable.
3. Check USB cable quality, connect to USB 2.0 Port
4. It may be also phone hardware problem
5. Also, loader may be corrupted, or current BootROM don't support it (affected are RAP3Gv3 and RAPIDO phones)
Failed to Process all Image files -> Failed to process RM-719_20.1.024_prd.core.C00 |