GSM-Forum - View Single Post - RIFF JTAG -Unbrick Samsung Galaxy S3, HTC 8x, HTC 8s World First ! ! !

**legija** · 08-31-2012, 18:51

31.08.2012 RIFF JTAG – Fly IQ285 unbrick – boot repair supported

Repairing bricked Fly IQ285 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Resurrector reflashes radio’s boot zones. There are options to reflash BOOT and RECOVERY zones.
To resurrect Fly IQ285:

Solder JTAG cable to Fly IQ285 JTAG pads;
Insert batter and connect USB Data cable;
Make sure Fly IQ285 is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:

Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

08-31-2012, 18:51	#317 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	31.08.2012 RIFF JTAG – Fly IQ285 unbrick – boot repair supported Repairing bricked Fly IQ285 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected. Resurrector reflashes radio’s boot zones. There are options to reflash BOOT and RECOVERY zones. To resurrect Fly IQ285: Solder JTAG cable to Fly IQ285 JTAG pads; Insert batter and connect USB Data cable; Make sure Fly IQ285 is selected in the list of models; If you use only battery, press Power On key; Click Resurrect button; Wait till software signals a successful operation completion; Disconnect power supply, de-solder JTAG wires; Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods. To enter download mode: Disconnect PC cable; Insert battery; Hold ‘Volume Down’ key and press ‘Power ON’ button. .