Dear Concern,
I Just bought Volcano For Chinese Android Phone R&D.
But Unfortunately i am not satisfy Because USB flashing not working.
As Volcano Team Release 1.5.3 and describe us how to read/write full flash.
Code:
for Read or Write flash just perform these steps
1- open volcano -> mtk
2- select boot 7.1216
3- select Read Flash or Write flash ( if write Flash select Flash file 1st)
4- Tick usb mode
5- Insert battery into phone
6- Press Run button
7- inset usb cable
Your phone will read flash or write flash as you select Desire option !!
There is some boot keys for these Android phones
Some phones you need to press and hold these keys before plug usb cable
Vol +
Vol -
Vol + and Vol -
Camera key
Vol - and power button
Vol + and power button
Vol - and vol + and power
camera key and power
camera key and vol +
camera key and vol -
power button
But Unfortunately aboive procedure are not working on Volcano Box.
One thing i Would like to tell you.. when you press boot key of any android phone and insert usb cable it generate "MTK Preloader USB VCOM PORT" for just 4 to 5 sec if the phone not detacted by SP_Flash_Tool then phone goes for charging.
When i use Volcano box for Read/Write flash and i press boot key and insert usb cable so PC Detect "MTK Preloader USB VCOM PORT" but Volcano not able to boot the phone and phone goes to flash mode.
Check below MTK android flashing thread.
http://forum.gsmhosting.com/vbb/f723...o-box-1502100/
Kindly Let us know.. is there bug in volcano or its something else.
thanks
Rgds
Bluffaster