View Single Post
Old 10-08-2012, 13:32   #5 (permalink)
yusniel
Freak Poster
 
yusniel's Avatar
 
Join Date: Mar 2011
Location: 1st Direct Source
Posts: 377
Member: 1537172
Status: Offline
Thanks Meter: 62
Yes i know, but always give me this error: here is the log:
Quote:
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C081xxxx
Using device: HTI, FW ver: 00.50, SN: 0000xxxx
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7601.17514
Module ver: 1.0.0.21064(15-06-2012), Library ver: 1.0.0.14102(15-06-2012)
Rpl backup already exist (C:\mobileEx\3.5\data\backup\02613718452_BACK.rpl) .
Processing MCU file: HL100V1100.nep
[TIKU BT2,TIKU ALGORITHM] size: 12.82 MB
Supported Ids: 1051, 1052, 2051
ASIC ID: 0x2051 [TikuEdge ver: 2.0]
SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.76.0 revision: 0.7 size: 0x2398
Supported Ids: 1051, 1052, 2051
FlashID0: 00EC 22E8 [Samsung K8S2815ETB,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
FlashID1: 00EC 0010 [Samsung KFM5616Q2M MuxOneNAND,256 Mbits] type: NAND hw: ONEMUX(M)
FlashID2: 0000 0001 [unused/removed]
FlashID3: 0000 0001 [unused/removed]
ExtBUSC: 0000 0000 18F0 9FE5 18F0 9FE5 18F0 9FE5
Algorithm: te_amd.fia [TIKU ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x84D8
Supported Ids: 1051, 1052, 2051
Performing Flash Authentication ...OK
UEM ID: 0002623D:3B8ADA60
Area [00000000-0001FFFF] erased in 0.771 s
Area [00020000-00DFFFFF] erased in 1 min 26.010 s
Flash programming ...
Programming completed in 1 min 41.271 s
File processed in 3 min 18.141 s
Processing CNT file: HL100_05w21_34_16_ANG01.image_ba
[TIKU BT2,TIKU MON CSM] size: 4.30 MB
Supported Ids: 1051, 1052, 2051
ASIC ID: 0x2051 [TikuEdge ver: 2.0]
SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.76.0 revision: 0.7 size: 0x2398
Supported Ids: 1051, 1052, 2051
FlashID0: 00EC 22E8 [Samsung K8S2815ETB,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
FlashID1: 00EC 0010 [Samsung KFM5616Q2M MuxOneNAND,256 Mbits] type: NAND hw: ONEMUX(M)
FlashID2: 0000 0001 [unused/removed]
FlashID3: 0000 0001 [unused/removed]
ExtBUSC: 0000 0000 18F0 9FE5 18F0 9FE5 18F0 9FE5
Algorithm: te_oncsm.fia [TIKU MON CSM] version: 4.76.0 revision: 0.7 size: 0x5660
Supported Ids: 1051, 1052, 2051
Mass Memory Storage Device detected.
Configuring MM bus ...
Formating partition ...OK
Opening MM device ...
Erasing disks ...OK
Flash programming ...
Se agotó el tiempo de espera del semáforo
Error while programming [2E] at 0x00000020, Result: 0000
flashing terminated !
  Reply With Quote
 
Page generated in 0.13552 seconds with 6 queries