View Single Post
Old 01-05-2002, 18:56   #5 (permalink)
OMBOSSMAN
No Life Poster
 
OMBOSSMAN's Avatar
 
Join Date: Dec 2001
Location: [☾✫ ]
Age: 54
Posts: 2,141
Member: 8159
Status: Offline
Thanks Meter: 98
Thumbs up

Hi to all.. Most of people asking about how to reapir GD-30 with<br /> message " WARNING unauthorized action detected"..<br /> to repair this phone follow steps below..

1.RUN program "GD50 repair&unlock by viknet v1.1 "

2.press "set test mode" and ON phone..phone goes test mode..<br />you will see IMEI and SERIAL..you can enter any ...for example

IMEI : 555555555555555<br />SERIAL:IIIIIIIIIIIIII

3. press "Repair and Unlock"<br />you will see again warning message..

repeat this steps Until you see [for me it was about 20 times]<br />IMEI: FFFFFFFFFFFFFF0<br />SERIAL:yyyyyyyyyyyy

that is very important..at this point you will<br />need to RUN program "NEO's GD30-50 Unlocker v7.3", next fill editbox<br />with "GD30" (if you are repairing GD30) or "GD50" (you know when)

<br />and press RESTORE. The progress bar should go to 100% and the phone<br />should "beep" two times. Phone working!

If you have GD30 and that solution is not working - flash it with USPU.<br />Solution is tested on few GD30 (first flashed with USPU) and one GD50 vA14.<br />OMBOSSMAN
  Reply With Quote
 
Page generated in 0.13291 seconds with 6 queries