View Single Post
Old 11-09-2012, 11:57   #6 (permalink)
PARMATMA
No Life Poster
 
PARMATMA's Avatar
 
Join Date: Nov 2005
Location: india
Age: 39
Posts: 2,414
Member: 201107
Status: Offline
Sonork: 100.1576954
Thanks Meter: 729
Try to flash with MXKEY
Select as dead usb.

Driver: nmwcdc, ver: 7.1.32.75
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14214(25-10-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.46
EBL version: Quantum_Bootloader_10.46_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35934604319672
RPL backup already exist (C:\mobileEx\3.5\data\backup\XGOLD_35934604319672_ back.RPL)
Processing file: rm761__11.81.mcusw
Downloading item CODE:rm761__11.81.mcusw_ebl_psi.fls, num block: 4, size: 25.25 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.391 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.422 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 2.125 s
Erasing area 0x40280000-0x41A7FFFE ...OK
Programming completed in 45.328 s
Checksum verified (0xBACD)
Processing file: rm761__11.81.ppm_mel
Downloading item CUSTackage_mel.ppm_ebl_psi.fls, num block: 1, size: 4.73 MB
Erasing area 0x41A80000-0x41F3A35A ...OK
Programming completed in 8.953 s
Checksum verified (0x2145)
Processing file: rm761__11.81.image_mel_059J5F9
Downloading item CUSTackage_mel_059J5F9.image.fls, num block: 1, size: 15.63 MB
Erasing area 0x421C0000-0x43E1FFFE ...OK
Programming completed in 30.797 s
Checksum verified (0xACC8)
Total time for flashing process(boot+erase+write) was 7 min 49.312 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Waiting for device boot up ...
Phone not found, retrying ...
Nokia USB Phonet detached.
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 38A96FA4
New device connected: nmwcdnsuc\Nokia USB Flashing Generic
Connection status: EHCI:HUB:HUB:USB 1.10 Full-speed
Error opening !
Nokia USB Phonet detached.
New device connected: nmwcdc\Nokia USB Phonet
Connection status: EHCI:HUB:HUB:USB 2.00 Full-speed
Nokia USB Phonet ready.


Phone type: RM-761 (Nokia 200)
SW version: V 11.81 20-08-12 RM-761 (c) Nokia
Imei plain: 35934604319672-8
Product code: 059J4P7
Language Pack:
- not available.

Imei net: 35934604319672
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
Nokia USB Phonet detached.




B.R.
Kalpesh Varia
  Reply With Quote
The Following User Says Thank You to PARMATMA For This Useful Post:
 
Page generated in 0.13436 seconds with 6 queries