POSSIBLE PROBLEMS
DB200X+NEXPERIA
damaged SCRC (imei mismatch), damaged seczone, damaged gdfs,damaged CCPU EROM
1. go to emptyboard tab
2. select model
3. on settings, check "signed mode", fill login details
4. press reset, connect phone
5. if gdfs structure okay, skip that step, otherwise add to firmware are gdfs in ssw format: one of
DB2001_G700_GDFS_IN_SSW_FORMAT.SSW
DB2001_M600_GDFS_IN_SSW_FORMAT.ssw
DB2001_P1_GDFS_IN_SSW_FORMAT.ssw
DB2001_P990_GDFS_IN_SSW_FORMAT.ssw
6. add to firmware area correct EROM
for m600,w950,p990: pda_ccpu_convert_red49_BROWN_CID49_DB2001.software
for w960,p1: pda_ccpu_convert_red53_BROWN_CID49_DB2001.software
7. press flash
8. reflash phone on usual PDA tab if needed.
phone could not boot using dcu60, erom version timeout error,etc
ACPU EROM damaged, to restore it
1. select correct PDA model
2. find corresponding EROM in dist\eroms\, add it to firmware area
3. select correct com port. ufs,usb can't be used for that operation.
4. press recovery
5. connect turned off phone
6. reflash phone via USB with normal firmware
S1 OPEN
phone could not boot and blinks red, you CAN flash phone
unlock phone using full signature unlock |