ASHA 305 SUCCESSFULLY FLASHED.
Code:
zZNokia Unlocker v0.08beta
------------------------------------------------------------------------------------------------------------------------
Detecting Security Dongle...
------------------------------------------------------------------------------------------------------------------------
zzDongle SN: 7E03C08D
Getting internal zzDongle internal firmware...
zZNK Internal Firmw: NKT v0.0D
Checking authorize update in dongle...
Dongle Counter Status: 46%
Initialization finished...
Ready...
------------------------------------------------------------------------------------------------------------------------
USB PORT SELECTED.
------------------------------------------------------------------------------------------------------------------------
BB5 Flash Started...
Infineon Flash Started...
Connect Phone ,Remove/Connect Baterry and Press shortly Power ON Button...
If software appear hang , please disconnect cable and try again.
err:[]: User has been aborted Operation
BB5 Flash Started...
Infineon Flash Started...
Connect Phone ,Remove/Connect Baterry and Press shortly Power ON Button...
If software appear hang , please disconnect cable and try again.
BootMsg : F00A1FB300020303010100FF
XGOLD213 CPU Detected.
Sending 2nd from core...
Botting 2nd...DONE!. (0x01)
Running ,: (0xAA)
Sending Algo from core...
Boot:Quantum_Bootloader_10.49_M1S1
Negotiating Speed...Done! (6500000)
FlashID: EC001230
Boot OK
Flashing MCU
Writing: rm766__03.60.mcusw_ebl_psi.fls
Finding Cert(s)... Done!
Sending Cert(s)...Done!
Founded 5 region(s).
Erasing Area 0x40000000 - 0x40020000
Erase Done.
Writting Area 0x40000000 - 0x40020000
Area Flash Done.
Erasing Area 0x40040000 - 0x40060000
Erase Done.
Writting Area 0x40040000 - 0x40060000
Area Flash Done.
Erasing Area 0x40060000 - 0x40120000
Erase Done.
Writting Area 0x40060000 - 0x40120000
Area Flash Done.
Erasing Area 0x40120000 - 0x41C00000
Erase Done.
Writting Area 0x40120000 - 0x41BE4000
Area Flash Done.
Erasing Area 0x43EE0000 - 0x43F00000
Erase Done.
Nothing to write,skipping area...
MCU Flash Sucessfully
Flashing CNT
Writing: rm766__03.60.image_mh_059K9H0_059P553_238_01.fls
Finding Cert(s)... Done!
Sending Cert(s)...Done!
Founded 2 region(s).
Erasing Area 0x42400000 - 0x43EE0000
Erase Done.
Writting Area 0x42400000 - 0x432E0000
Area Flash Done.
Erasing Area 0x43F00000 - 0x43F80000
Erase Done.
Nothing to write,skipping area...
CNT Flash Sucessfully
Flashing PPM
Writing: package_mh.ppm_ebl_psi.fls
Finding Cert(s)... Done!
Sending Cert(s)...Done!
Founded 1 region(s).
Erasing Area 0x41C00000 - 0x42400000
Erase Done.
Writting Area 0x41C00000 - 0x423BCAE0
Area Flash Done.
PPM Flash Sucessfully
Rebooting Phone...
Operation Done!.
Full Factory Reset Started...
Not Phone Detected...
Full Factory Reset Started...
Operation Done.
Connect Phone ,Remove/Connect Baterry and Press shortly Power ON Button...
------------------------------------------------------------------------------------------------------------------------
Read Security Code Started...
------------------------------------------------------------------------------------------------------------------------
Detecting Phone...
SW Version: V 03.60 06-06-12 RM-766 (c) Nokia
Phone Model: Nokia 305
IMEI:
Generation Type:
Security Code: 12345
Operation Done.
------------------------------------------------------------------------------------------------------------------------
Read Security Code Started...
------------------------------------------------------------------------------------------------------------------------
Detecting Phone...
SW Version: V 03.60 06-06-12 RM-766 (c) Nokia
Phone Model: Nokia 305
IMEI:
Generation Type:
Security Code: 12345
------------------------------------------------------------------------------------------------------------------------
Resetting Code to 12345
Clearing Flags..
Now Code is 12345.
Operation Done.