S5230 easy repair boot...
Code:
Checking repair data...
For support and updates visit http://easy-jtag.com
I/O Level set to : 3000 mV
Box S/N: 0D0D******* ,SW Ver.: 01.42
Connecting to Target...
JTAG device: BCM2133
CPU IDCODE detected: 0x07926F0F
Manufacturer: 0x787, Part: 0x7926, Version: 0x0
Halting CPU...
Starting target communication...
Detecting nand memory parameters of bank (0) ...
NAND flash device ID:00EC:00BA 'NAND 256MiB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:2048 bytes , Block size:64 pages
NAND Writing BOOT...
NAND Write OK! Wrote up to offset 0x00080000 in 4,921875s (107,276 KiB/s)
Repair DONE! Restarting phone...
All Done.
Box are disconnected!