ito naman sa bm622 na package date 2011... medyo mahirap. di kasi gagana minsan yung generator by heartly
getting admin passord para ma ineble yung telnet
1. dl putty here Putty
2. Open nyo yung putty nyo tapos lagay nyo sa host 192.168.1.1 sa port naman 22, yung connection type dapat SSH, then click Open
Login as : Firefly <enter>
[email protected]'s password: $P4mb1h1r4N4m4nT0!! <enter>
Server refused to allocate pty
ATP> shell <enter>
shell
# cd var <enter>
cd var
# cat curcfg.xml <enter>
3. may lalabas na maraming text sa window ng putty nyo, copy nyo lang lahat yun, pinaka mabilis e i right click nyo ung title bar ng putty nyo tapos me makikita kayong Copy All to Clipboard i click nyo lang yon.
4. open kayo ng notepad then i paste nyo ung na copy nyong text then Find nyo ung "Admin" use F3 sa notepad then lagay nyo sa Find What ay Admin then click Find Next be sure na nasa i taas ang cursor nyo para ma search from the beginning to the end hehehehe...
5. ganto makikita nyo dapat
X_ATP_UserInfoInstance InstanceID="1" Username="admin" Userpassword="samplepassword123"
6. wag masyado exited hindi pa yan ang password nyo dahil naka encyrpt yan, i paste nyo d2 yung admin password na nakuha nyo at try natin i decrypt..
7. may nakita akong decoder sa internet just use this site to decode your password
Welcome to OpinionatedGeek :: Part of the solution piliin nyo basecode 64
TUT For CHINGING MAC FOR BM622 2011 and 2012 package date
1st. Plug your modem
2nd. Open BM622_2011.exe and click start to get admin pass.
3rd. Copy decoded admin password from bM622_2011.exe
4th. Open Browser and type 192.168.1.1
5th. login.. Uername: admin password: decoded password frm BM622_2011.exe
6th. Go to Advance/ACL check the Box in the left side of telnet and apply.
close browser.
7th. click start/run and type telnet 192.168.1.1 enter
8th. Login:Firefly enter. Password:$P4mb1h1r4N4m4nT0!! enter
note: pag type nyo ng password wala kayong makikita
pero tuloy mo lang, o kaya copy paste nalang para mas simple.
9th. ATP>xiugai allmacdizhi xx:xx:xx:xx:xx:xx enter. change mac CMD.
note:Yong mga X palitan nyo ng mac address na buhay.
ito yung lalabas pag success ang pag palit nyo ng mac
WAN MAC ADDRESS UPDATE SUCCESS xx:xx:xx:xx:xx:xx
LAN MAC ADDRESS UPDATE SUCCESS xx:xx:xx:xx:xx:xx
10th. ATP>restoredef enter.
hintayin nyo lang mag reboot yung modem.
kung buhay yung mac address mo, after
mag reboot connected na yan
hit thanks nalang kung naka tulong to sa inyo, pero kung hindi,.. band nyo nalang ako.
pwede rin wag nalang mag thanks, ang importante sa akin maka tulong lang, kasi sa post ng iba ko lang to nakukuha, di ako gumawa nyan. kaya sa madaling salita, di ko yan pinag yayabang. cridet yan sa may gawa.... share share kasi pag ganitong furom, dami ko rin matutunan dito kaya ako nag pa register, nag kataon lang may nag post ng ganito tapos alam ko yung sagot. salamat