and when i try to flash with fbus i get this
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 5], SN: C08175B0
Using device: HTI, FW ver: 00.50, SN: 0000684D
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.21313(12-12-2012), Library ver: 1.0.0.14337(12-12-2012)
Phone type: RM-721 (Nokia C2-01)
SW version: V 11.40 24-10-12 RM-721 (c) Nokia
ERROR: Packet Error(0xAA), code 0xC0000001
ERROR: Packet Error(0xAA), code 0xC0000002
Error details:
Bad contact, TX line remains low !
VCC_PH BSI TX RX RX2 CLK
1 0 0 1 1 0
ERROR: bootstrap failed!
bot cable problem,tested 2 |