Still I will add from myself according to the MTKdroidTools program
Code:
A. If on china Android v 2.2.1 - 2.3.5 or v4.x.x with Kernel v3.x.x is established
1 . We install drivers for ADB
2 . We install the program on a disk with enough of an empty seat
3 . We insert the SD card into phone, it is better to sim to take out. On MT6575 and 77 on the majority of phones at backup by default without cache and userdata, everything has to will be located on the internal card. Except for insertions with a reduced volume of the internal card and phones with the flash MTD type.
4 . We start the program and we connect switched-on phone with the SD card a cable to PC. If all OK, below on the bottom bar the blue indicator lights up and on a tab information will appear information on phone.
5 . On the bottom bar we press the ROOT button. If the button isn't present, root shell already means is! After a while has to there will be temporary root. Thus the indicator will replace color on green and there will be information on the uboot version and the display controler. If it didn't occur, it is possible to receive root shell only through CWM insertion.
6 . It will be offered to keep бдоки phone (backup, a backup). We keep. If there are no mistakes allow to pack in archive and we copy this archive in a reliable place
7 . It will be offered to establish SU (SuperUser). If it is necessary - agrees. These are many associate with the term "receive rues" (get root).
8 . The BuildProp button will correct the build.prop file and after dumping on factory settings phone will be started in Russian and with time zone Moscow. If necessary it is possible to edit before it the build_prop_replace.txt file
9 . The Delete china button will remove unnecessary Chinese appendices. The list can be edited in the files_for_delete.txt file
10 . The Recovery and Boot button will establish and will prepare CWM and patchenny boot. Patchenny boot is necessary for constant root shell and the program it will be possible to keep all blocks having connected phone in a usual mode. CWM we look for in a subject of the phone for the insertion. Or we look for CWM from similar phone and we collect the program on the basis of the quarrystone and this CWM from similar phone. In more detail about it http://forum.china-iphone.ru/viewtopic.php?p=714115#p714115
11 . Prezagruzhayem phone. Conveniently button on the bottom bar.
12 . We have own backup, the factory cleaned insertion with SuperUser, patchenny boot and established CWM for the phone. It isn't necessary to spread the section userdata in public access! It contains personal data and IMEI. It is necessary to spread files already prepared for FlashTool!
B.If of Android v2.3.6 or 4.x.x with Kernel v2.6.* and for this insertion is CWM
1 . We install drivers for ADB and we install the program on a disk with enough of an empty seat
2 . We stitch through FlashTool only CWM. If necessary it is possible to receive scatter for FlashTool by means of this program in a window after pressing the Card of Blocks button.
3 . We insert the SD card into phone. On the internal card in the CWM mode while it is impossible to keep.
4 . We start the program and we connect switched-on phone in the CWM mode a cable to PC. If everything OK below on the bottom bar lights up
download link
MTKdroidTools.rar