volcano tem help ....................
Version: V3.8
SN:001-006-222
Port:COM7
After format or Flash you have to press & hold power button for at least 1.30 mins.
Available Ports:COM1 COM7
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 3.55 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Set the Pinouts failed,please reconnect and try again!
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 3.55 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM6), (VID_1782&PID_4D00)
Pinouts setting complete!
Temporary does not support this operation to write.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
Detection initiated...
can't read/write.....................................
please next update add |