PROBLEM SOLVED WITH OTHER FIRMWARE
BOOT:F:\FIRMWARE\Z3X SAMSUNG\S5360\S5360DXMA1_QLBMA1\DefaultCalDataWith Boot_S5360DXLL1_REV05.tar.md5
PDA:F:\FIRMWARE\Z3X SAMSUNG\S5360\S5360DXMA1_QLBMA1\PDA_S5360DXMA1_REV 05.tar.md5
PHONE:F:\FIRMWARE\Z3X SAMSUNG\S5360\S5360DXMA1_QLBMA1\MODEM_S5360DXLL1_R EV05.tar.md5
CSC:F:\FIRMWARE\Z3X SAMSUNG\S5360\S5360DXMA1_QLBMA1\GT-S5360-MULTI-CSC-QLBMA1.tar.md5
Quote:
Selected model: S5360
Selected port: COM42 Z3X Serial Port
Selected port speed: 115200
File analysis... OK
Total file size: 0x0E4D3BFC
Searching USB Flash Interface... detected COM5
Setup connection... OK
Reading PIT from phone... OK
Saved to C:\Program Files (x86)\Z3X\Samsung\SamsungTool\Pit\S5360_16-5-2013_13-16-45.pit
Sending BcmBoot.img... OK
Sending HEDGE_NVRAM8_RF_LE.bin... OK
Sending sysparm_dep.img... OK
Sending sbl.bin... OK
Sending boot.img... OK
Sending system.img... OK
Sending userdata.img... OK
Sending param.lfs... OK
Sending BcmCP.img... OK
Sending csc.rfs... OK
Flashing done (time - 00:00:50)
Done with Samsung Tool v.14.4
Done with Samsung Tool v.14.4
|