Quote:
Originally Posted by Dzirt  My dear very stupid friend! I want say again - here is BEST section. Not ATF. Go to correct section and post your stupid rumors, explores, sucesses and e.t.c. |
hello my Dear frndz ..........just keep ur language on ur mind dont show here understand.
i have both log aft and infinity but by mistakely i copy atf log thzt why nothing els..
FLASHING VERY WELL LIKE MASKA ..................
I FLASH 114 WITH FILE 110 RM-827
ALL IS WELL THNX INFINITY TEAM
REPORT HERE
registered to: naushad09
Connect phone on selected interface...
Core : v1.63 , BB5XG FlashEngine : v4.1
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm827__03.04.mcusw
PPM : rm827__03.04.ppm_mh1
PPM2 : rm827__03.04.ppm_mh1
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---
Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.49_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates
Reading CCC
Reading HWC
Reading NPC
IMEI 1 : 355221055740024
IMEI 2 : 355221055740032
PCcode : þØZ%i
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : c:\InfinityBox\BEST\Backup\Cert\355221055740024_XG 213_CRT.rpl
===Flashing [MCU]===
File : rm827__03.04.mcusw
Image : rm827__03.04.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:05
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01940000
Erasing, wait ...
Erase done, time : 00:02:21
Write , Start : 0x40280000 , Len : 0x018C0000
Flashing , wait ...
Region flash done, time : 00:00:37
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
===Flashing [PPM]===
File : rm827__03.04.ppm_mh1
Image : package_mh1.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41BC0000 , Len : 0x00600000
Erasing, wait ...
Erase done, time : 00:00:17
Write , Start : 0x41BC0000 , Len : 0x0031E1A4
Flashing , wait ...
Region flash done, time : 00:00:03
Flashing done!
Total flash time : 00:03:29
Reboot phone now...
Reading Phone Info....
Connected phone - C2-00
Software Info: V 03.04 20-04-12 RM-704 (c) Nokia
IMEI: 355221055740024
PPM version : V 03.04 20-04-12 RM-827 (c) Nokia MH1
Product code: 059Q9J5
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 42 certs
Data exist, skip certificate repair...
AfterFlash operations done ;D
Done!
Connect phone on selected interface...
Elapsed: 00:04:08
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
AND IF U CAN DO SO DELETE MY ATF POST