 Thanks Volcano n9300 6820/8810pattern lock remove succes
Volcano Updated: 2013-05-17
Connecting...
Connection successful,connected state!
Version: V3.8
SN:147-548-004
Port:COM11
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Connecting...
Connection successful,connected state!
Version: V3.8
SN:147-548-004
Port:COM11
Available Ports:COM1 COM11
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Set the Pinouts failed,please reconnect and try again!
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM21), (VID_1782&PID_4D00)
Temporary does not support this guide to read the information function
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM21), (VID_1782&PID_4D00)
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 00AD00BC
Flash Type:[Hyundai] NAND_HY27UT088G2A
FLASH LEN:0x20000000
Set to Factory successfully.
samsung china n9300 6820/8810pattern lock remove succes by POWER ZONE... |