View Single Post
Old 06-12-2013, 15:49   #33 (permalink)
OHIIM
Cheater -Don't Deal with him-
 
Join Date: Mar 2006
Location: ACCRA GHANA
Age: 39
Posts: 827
Member: 244250
Status: Offline
Sonork: 100.160773
Thanks Meter: 196
samsung i9000 boot fix done.

EasyJtag Suite ver.: 1.0.41.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9000 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: 16160C0575759703 ,FW Ver.: 01.44
Connecting to Target...
JTAG device: S5PC110
CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing BOOT...
NAND Write OK! Elapsed time: 1.359375s (194.207 KiB/s)
NAND Writing PIT...
NAND Write OK! Elapsed time: 0.734375s (359.489 KiB/s)
NAND Writing SBL1...
NAND Write OK! Elapsed time: 9.203125s (143.430 KiB/s)
NAND Writing SBL2...
NAND Write OK! Elapsed time: 9.390625s (140.566 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 1.171875s (901.120 KiB/s)
All Done.
  Reply With Quote
The Following User Says Thank You to OHIIM For This Useful Post:
 
Page generated in 0.07365 seconds with 7 queries