GSM-Forum - View Single Post

fakarukhan · 06-17-2013, 13:30

FLASH LEN:0x20000000
Start analysis mobile data...
For this operation need to enable ADB.
Detection initiated...
Vcc: null
Gnd: 7
Analyzing D+ and D-...
D+ = 4, D- = 3
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM32), (VID_1782&PID_4D00)

Device found failed, successive procedure aborted

Detection initiated...
Vcc: null
Gnd: 7
Analyzing D+ and D-...
D+ = 4, D- = 3
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM32), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 002C00BC90555600
Flash Type:[Micron] MT29C4G48MAZAPAKD
FLASH LEN:0x20000000
>>Start analysis mobile data...

06-17-2013, 13:30	#2 (permalink)
fakarukhan Junior Member Join Date: Jun 2013 Posts: 6 Member: 1953249 Status: Offline Sonork: 100.1638044;MR. Thanks Meter: 2	karbonn a3+ formet with volcano tool-v.2.1.7 after dead,please any solution give me FLASH LEN:0x20000000 Start analysis mobile data... For this operation need to enable ADB. Detection initiated... Vcc: null Gnd: 7 Analyzing D+ and D-... D+ = 4, D- = 3 Analyzing USB device, please wait... Find USB device:SCI USB2Serial (COM32), (VID_1782&PID_4D00) Device found failed, successive procedure aborted Detection initiated... Vcc: null Gnd: 7 Analyzing D+ and D-... D+ = 4, D- = 3 Analyzing USB device, please wait... Find USB device:SCI USB2Serial (COM32), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. Flash ID: 002C00BC90555600 Flash Type:[Micron] MT29C4G48MAZAPAKD FLASH LEN:0x20000000 >>Start analysis mobile data...