[blang]

Originally Posted by Miftah_Lutfi

Hello.., I have all almost JTAG box in the market, and Easy-Jtag is my last box..,

So i try to repair GT-S5830 deadboot with easy-jtag, repair process done, but still can't powered on. I try with other jtag box, and phone alive.

is there any success story in repair s5830 with easy jtag ?
or is it bug..??

EasyJtag Suite ver.: 1.0.41.0 started.
 Operating system ver.: Windows 7 (build 7601, Service Pack 1).
 For support and updates visit http://easy-jtag.com/
 Initialising: SAMSUNG GT-S5830 Config ver.:1.00
 I/O Level set to : 2600 mV
 Box S/N: 0F0F010A3044387B ,FW Ver.: 01.44
 Connecting to Target...
 JTAG device: MSM7227T 
 CPU IDCODE : 0x503C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x5
 CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
 Halting CPU...
 Starting target communication...
 Detecting nand memory parameters ...
 NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
 NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
 NAND Writing MIBIB...
 NAND Write OK! Elapsed time: 15.239872s (103.938 KiB/s)
 NAND Writing QCSBL...
 NAND Write OK! Elapsed time: 5.019287s (105.194 KiB/s)
 NAND Writing OEMSBL1...
 NAND Write OK! Elapsed time: 7.512429s (105.425 KiB/s)
 NAND Writing APPSBL...
 NAND Write OK! Elapsed time: 20.025145s (105.467 KiB/s)
 NAND Writing UPCH...
 NAND Write OK! Elapsed time: 10.166582s (103.870 KiB/s)
 All Done.

BR..,

thanks for report. i will check tomorow this resurector.
May be we did mistake.