s5360l sucsess eazy jtag
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.41.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit
EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5360L Config ver.:1.00
I/O Level set to : 3000 mV
Box S/N: xxxxxxxxxx ,FW Ver.: 01.44
Connecting to Target...
JTAG device: BCM21553
CPU IDCODE : 0x07B3617F Mfg.: 0x0bf, Part: 0x7b36, Ver.: 0x0
CPU Manufacturer: SST/Broadcom , CPU Name: BCM21553
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:4096 bytes , Block size:64 pages
NAND Writing BCM_BOOT...
NAND Write OK! Elapsed time: 1.953125s (135.168 KiB/s)
NAND Writing SBL1...
NAND Write OK! Elapsed time: 15.562500s (135.711 KiB/s)
NAND Writing SBL2...
NAND Write OK! Elapsed time: 15.578125s (135.575 KiB/s)
NAND Writing PIT...
NAND Write OK! Wrote up to offset 0x00440000 in 0.000000s (inf KiB/s)
Warning! Unexpected end of flash file detected !!!
NAND Write OK!
NAND Writing UPCH...
NAND Write OK! Elapsed time: 7.796875s (135.439 KiB/s)
All Done.