GSM-Forum - View Single Post - 24 hours Ambulance services for mobiles in DRAGON MOBILE HOSPITAL

**Dipendra Pathak** · 07-19-2013, 06:47

Receive Data 0x7E Error... - Android CPU Solution

We want to provide the solution through some hints/tips because this is not software problem but this is driver problem.
we are starting this thread, so that the we also could be confirm by our valuable customer. So, try to connect our supporter
if you are stuck in any point

Check this post

http://forum.gsmhosting.com/vbb/f646...-help-1687278/

Also if you find the problem like this:

In such a case, open the "DEVICE MANAGER"

we can see the driver name as "SPRD U2S Diag"

"SPRD U2S Diag" driver not for SPD chip Device. So, when you try each and every time, it shows error.

we need uninstall it and instll to sci (spd flash driver).

open the c:\windows\system32

And search all "sprd" and "spd" name files

Delete all

after del,you need use dragon software pinfind again

after pinfind,in the driver manager will tell you install the new driver

install the driver <7-Select SCI Driver>

after install the driver, we can read flash file. Now, dragon successfully reads.

Good Luck Dragon Users

BR

Dipendra Pathak

07-19-2013, 06:47	#3 (permalink)
Dipendra Pathak Product Manager Join Date: Apr 2008 Location: Whitehole throught Blackhole! Posts: 9,582 Member: 747989 Status: Offline Sonork: 100.1593052 Thanks Meter: 8,621	24 hours Ambulance services for mobiles in DRAGON MOBILE HOSPITAL Receive Data 0x7E Error... - Android CPU Solution We want to provide the solution through some hints/tips because this is not software problem but this is driver problem. we are starting this thread, so that the we also could be confirm by our valuable customer. So, try to connect our supporter if you are stuck in any point Check this post http://forum.gsmhosting.com/vbb/f646...-help-1687278/ Also if you find the problem like this: In such a case, open the "DEVICE MANAGER" we can see the driver name as "SPRD U2S Diag" "SPRD U2S Diag" driver not for SPD chip Device. So, when you try each and every time, it shows error. we need uninstall it and instll to sci (spd flash driver). open the c:\windows\system32 And search all "sprd" and "spd" name files Delete all after del,you need use dragon software pinfind again after pinfind,in the driver manager will tell you install the new driver install the driver <7-Select SCI Driver> after install the driver, we can read flash file. Now, dragon successfully reads. Good Luck Dragon Users BR Dipendra Pathak Last edited by Dipendra Pathak; 04-17-2014 at 14:06.