Hello.
I have PxPhone i9220 with MT625A CPU, and I'd like to translate, but I can not read backup.
How can I read backup?
Code:
[Infinity Box] MModule v4.45
smart-card: connected (Axalto e-gate 0)
S/N: 0694:0120:00
Wait...
trying to select model: /AUTODETECT
model selected via command line: _Autodetect MT6205-6239 NOR
Device: _Autodetect MT6205-6239 NOR
Initialization done
Device: _Autodetect MT6250-6253 etc.
==== [2013-07-18 16:42:59] ====
COM98 [VCP1] selected
module v4.45
Device: _Autodetect MT6250-6253 etc.
Checking data, wait...
Action: read flash NAND
interface: BROM_DLL_v3.1108.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
bootcode current/expected: 0.0/3.2
CPU: 0000:0000:0000
status: 00
bbchip bl ver: 00
NOR chip is not detected
NAND chip is not detected
Repeat operation, Press and HOLD Power button more long time !
internal RAM size: 00000000
external RAM [HW_RAM_UNKNOWN, CS0] size: 00000000
sec error code: 00
error: can not boot device: 07E6:S_BROM_FAIL_TO_GET_BBCHIP_HW_VER
error: last error: 07E6:S_BROM_FAIL_TO_GET_BBCHIP_HW_VER
Disconnect...
done
Finished, time used: 1 min 5 sec
Remove/Install battery now !
Device: _Autodetect MT6228-6276 NAND
In most cases you can read "firmware" instead of "full flash",
it may helps to save a lot of time with the same functionality.
Suggestion: read "firmware" now
Do you want to read "firmware" instead of "full flash" ?
==== [2013-07-18 16:44:31] ====
COM98 [VCP1] selected
module v4.45
Device: _Autodetect MT6228-6276 NAND
Checking data, wait...
Action: read flash NAND
interface: BROM_DLL_v3.1108.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
bootcode current/expected: 0.0/3.2
CPU: 0000:0000:0000
status: 00
bbchip bl ver: 00
NOR chip is not detected
NAND chip is not detected
Repeat operation, Press and HOLD Power button more long time !
internal RAM size: 00000000
external RAM [HW_RAM_UNKNOWN, CS0] size: 00000000
sec error code: 00
error: can not boot device: 07E6:S_BROM_FAIL_TO_GET_BBCHIP_HW_VER
error: last error: 07E6:S_BROM_FAIL_TO_GET_BBCHIP_HW_VER
Disconnect...
done
Finished, time used: 38 sec
Remove/Install battery now !
Device: _Autodetect MT6205-6239 NOR
==== [2013-07-18 16:45:21] ====
COM98 [VCP1] selected
module v4.45
Device: _Autodetect MT6205-6239 NOR
Checking data, wait...
advanced flash detection enabled
Action: read flash
====> Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 22 sec
Remove/Install battery now !
Pictures:
http://gsmpro.com.pl/data/PxPhone_3.jpg http://gsmpro.com.pl/data/PxPhone_2.jpg http://gsmpro.com.pl/data/PxPhone_1.jpg