Quote:
Originally Posted by Qaisar Mahmood  @dracony
Select Baud Rate 921600 First Do Read info then Do Write Flash.
BR
Qaisar Mahmood |
set baudrate 921600
Read info log
Detection initiated...
Vcc: null
Gnd: 7
Analyzing D+ and D-...
D+ = 4, D- = 3
Detection D+/D- with 6,83 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 5
Setting...
Find USB device:SPRD U2S Diag (COM87), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC8810/6820 [88100001]
Flash ID: 009800BC90667600
Flash Type:[TOSHIBA] TYBC0A111236KC10
FLASH LEN:0x20000000
File partition was not found.
after this do write
