Full flash write done but phone still dead!
help!
thanks!
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 1,51 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4
Setting...
Find USB device:SCI USB2Serial (COM237), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 009800BC90667600
Flash Type:[TOSHIBA] TYBC0A111236KC10
Flash writing userdata...100%
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it. |