View Single Post
Old 09-04-2013, 06:56   #10 (permalink)
cdsrinivas
Freak Poster
 
Join Date: Mar 2008
Posts: 114
Member: 717275
Status: Offline
Thanks Meter: 21
Yes excellent done lot of thanks


<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> PDA_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> MODEM_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> GT-S5360-MULTI-CSC-ODDLA1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> PDA_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> MODEM_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> GT-S5360-MULTI-CSC-ODDLA1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> PDA_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> MODEM_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> GT-S5360-MULTI-CSC-ODDLA1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/071> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> PDA_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> MODEM_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> GT-S5360-MULTI-CSC-ODDLA1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/071> Odin v.3 engine (ID:71)..
<ID:0/071> File analysis..
<ID:0/071> SetupConnection..
<ID:0/071> Initialzation..
<ID:0/071> Set PIT file..
<ID:0/071> DO NOT TURN OFF TARGET!!
<ID:0/071> Get PIT for mapping..
<ID:0/071> Firmware update start..
<ID:0/071> BcmBoot.img
<ID:0/071> NAND Write Start!!
<ID:0/071> HEDGE_NVRAM8_RF_LE.bin
<ID:0/071> sysparm_dep.img
<ID:0/071> Sbl.bin
<ID:0/071> boot.img
<ID:0/071> system.img
<ID:0/071> userdata.img
<ID:0/071> param.lfs
<ID:0/071> BcmCP.img
<ID:0/071> Transmission Complete..
<ID:0/071> Now Writing.. Please wait about 2 minutes
<ID:0/071> Receive Response form LOKE
<ID:0/071> csc.rfs
<ID:0/071> RQT_CLOSE !!
<ID:0/071> RES OK !!
<ID:0/071> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/071> Removed!!
  Reply With Quote
The Following User Says Thank You to cdsrinivas For This Useful Post:
 
Page generated in 0.07941 seconds with 7 queries