View Single Post
Old 09-06-2013, 15:28   #2 (permalink)
cellcarcol
No Life Poster
 
cellcarcol's Avatar
 
Join Date: Apr 2005
Posts: 1,489
Member: 138781
Status: Offline
Thanks Meter: 766
other full tested same steps


Please press Power On key before any Read/Write/Erase operation.
Error 6 the definition is not set.
PIN1 = VCC
PIN2 = TRST
PIN3 = TDI
PIN4 = TMS
PIN5 = TCK
PIN7 = TDO
PIN8 = SYSRST
Setting definition...
Set definition done!
Setting definition...
Set definition done!



erase flash select autofullflash

==========================================
Erase operation(Make sure to press Power on key)...
CPU ID: 7F61B307.
Flash ID: 00EC0050 (512M).
Release Power on key now and operation continues...
Erase succeed!
Time: 18 s

==========================================

write boot select 1MB

==========================================
Writing in progress(make sure to press Power On key)...
CPU ID: 7F61B307.
Flash ID: 00EC0050 (512M).
Release Power on key now and operation continues...
Write succeed!
Time: 17 s


>>==========================================


then you must press vol + vol-+ + power.

Last edited by cellcarcol; 09-06-2013 at 15:37.
  Reply With Quote
The Following 3 Users Say Thank You to cellcarcol For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.12885 seconds with 6 queries