View Single Post
Old 09-19-2013, 11:29   #16 (permalink)
Dipendra Pathak
Product Manager
 
Dipendra Pathak's Avatar
 
Join Date: Apr 2008
Location: Whitehole throught Blackhole!
Posts: 9,582
Member: 747989
Status: Offline
Sonork: 100.1593052
Thanks Meter: 8,619
How to Repair MTK IMEI With USB Method


WIth the help of Dragon Main Cable + Main cable Power supply (Do not use Battery )

1. Open the Dragon Software
2. Choose "MTK" tab
3. Tick "Scan Pinout"
4. Choose "USB" (NOT COM Port)
5. Now, Connect the Device With Dragon MAIN CABLE and its power cable (NOT Battery and USB cable)
6. Click on "Start"
7. Wait until the Yellow mark goes to 100% and turn Green
8. Write Valid IMEI
9. Click on "Write IMEI"
10. Wait until IMEI Written.
Done



WIth the help of USB Cable and Battery (Do not use Dragon Main Cable and Power supply)


1. Open the Dragon Software
2. Choose "MTK" tab
3. Untick "Scan Pinout"
4. Choose "USB" (NOT COM Port)
5. Click on "Start"
6. Insert Battery + USB Cable and now connect to the computer
7. Wait until the driver installed
8. Now you will see Yellow mark goes upto 100% and it turns Green
9. Write Valid IMEI
10. Click on "Write IMEI"
11. Wait until IMEI Written.
Done


NOTE: Sometimes you must ON Device, and choose Device Diagnostics Port to repair IMEI.


STILL IMEI NOT CHANGING WHAT IS THE PROBLEM?

Sometimes You changed the IMEI of 6252 (MTK) using Dragon Box, Still IMEI not changing, in such a case, follow the methods:

1. Backup the flash file of the mobile
2. Save it to the hard disk or portable device
3. Write it back to the Device (Mobile)
4. Check the IMEI
5. Done

Please USE only USB Method. COM method not supported yet.





Last edited by Dipendra Pathak; 09-26-2013 at 09:52.
 
The Following 4 Users Say Thank You to Dipendra Pathak For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.06718 seconds with 7 queries