I need flash file
"Samsung S3850" or "N3"
CPU TYPE: sc6820-SС8810
Version: MOCOR C913 MODEM W12.43 P1 DEBUG
Info avator:
Code:
Initializing...
DA_LIB_VER_5.6.1.1
You must install the correct USB drivers before any actions...
You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports...
Auto reset and search the USB-to-Serial...
Connecting...
Spd USB-to-Serial=COM12
Connected...sending boot...
Boot1 is Done.
Wait for ACK...
Done.
Change baud to 921600
Sending Boot2...
Boot2 is Done.
Wait for ACK...
Done.
ArmBootMode: 8810004000005A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC8810 Flash: NAND_MT29F4G08ABC_2
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 00
Format Dragon:
Code:
>>> USB Pinfind No need Hold Mobile Power key...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM28
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:921600
Flash ID:00002CBC
Flash Size:20000000->512M
Flash Name:NAND_SamSungMT29C4G48MAZAPAKD
CPU Name:6820/8810
>>> Auto Formatting ...
Format_RuntimeNV...Fail.
Format_Cache...Fail.
Format_Misc...Fail.
Format_UserData...Success.
All Done...
Phone dead after Format Dragon.