View Single Post
Old 10-11-2013, 15:53   #5 (permalink)
borjan_vujic2
Freak Poster
 
Join Date: Feb 2006
Location: Republic of Serbia, Brod
Age: 31
Posts: 193
Member: 236764
Status: Offline
Thanks Meter: 11
Quote:
Originally Posted by temp_temp View Post
Code:
Number of Image Files: 3

Processing Image File : 
 rm840__02.03b.mcusw
Processing Image File : 
 rm840__02.03b.ppm_e3
Processing Image File : 
 rm840__02.03b.image_e3_059R1S2


AUTO SELECTED DEAD USB FLASHING...

If Phone Booting does not Start in 5 Seconds,
Then Perform Steps 1, 2, and 3...

1. Remove USB Cable and Battery...
2. Connect USB Cable.
3. Connect Battery.

***** IF PHONE STARTS CHARGING OR DOES NOT BOOT *****
******* REMOVE BATTERY AND PUT IT BACK AGAIN. *******
======================================================


Infineon Boot: F01650A9070100030101E00018090004846449DA8234FFFF

         <<<< Connect Battery Now >>>>

Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Flash Chip Manufacturer: STMicroelectronics
Flash Boot Successful...
Unique Data: E000180900048464-49DA8234
Original Product Code: 059R203
Reading : CCC... OK!
Reading : HWC... OK!
Reading : NPC... OK!
RPL Backup was Successful...
 Plain RPL saved to:
 C:\AdvanceBox Turbo Flasher\Nokia\Backup\355520054263676\355520054263676_135839.rpl

Current File    : rm840__02.03b.mcusw
Number of Images: 8
psi_flash_unsigned.fls
slb_signed.fls
main_toc_signed.fls
rm840__02.03b.mcusw_signed_mcusw.fls
swap_signed.fls s
dynsw.fls
aeneas_signed.fls s
fota_signed.fls s
Processing Data Block 0x00
Erase Block: 0x00090000~0x000A0FDE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x01
Erase Block: 0x60000000~0x6003FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x02
Erase Block: 0x60040000~0x600403FE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x03
Erase Block: 0x62E00000~0x63D03DCA
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Erase Block: 0xFFF00000~0xFFF7FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Processing Data Block 0x04
Erase Block: 0x80000000~0x80C13E9A
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x05
Erase Block: 0x62080000~0x620C3FFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x06
Erase Block: 0x63F79C00~0x63FF046E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x07
Erase Block: 0x61F00004~0x62045396
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...


Current File    : rm840__02.03b.ppm_e3
Number of Images: 1
package_e3.ppm_ebl_psi.fls
Processing Data Block 0x00
Erase Block: 0x80F00000~0x816340E2
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...


Current File    : rm840__02.03b.image_e3_059R1S2
Number of Images: 1
package_e3_059R1S2.image.fls
Processing Data Block 0x00
Erase Block: 0xA1000000~0xA27597FE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Erase Block: 0xAE000000~0xAE2FFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...

Total Flashing Time (Erase + Flashing) : 00:00:15
(Booting time is NOT Included)

Waiting for Phone to Start-Up..(Max 150 seconds)



Scanning USB Ports...

================================================
             Basic Phone Information             
================================================
MCU Version: V 02.03b 08-04-13 RM-840 (c) Nokia           
IMEI Plain : 355520054263676
IMEI Spare : A355520054263670
IMEI SV    : 33555200542636704F
Phone Model: Nokia 301
Category   : Phone
Phone Type : RM-840

================================================
            Extended Phone Information           
================================================
Product Serial Number: 0692727BH
Product Code         : 059R203
Module Code          : 0205267
Basic Production Code: 059P5R1
Long Production SN   : 0
PPM SW Version       : V 02.03b 08-04-13 RM-840 (c) Nokia            E3
BT MCM Version       : 19e2-4702G12
ADSP Version         : PMU_MAXIM8939B
MCU SW Version       : V 02.03b 08-04-13 RM-840 (c) Nokia
HW Version           : 1000
UPP Version          : MFR:0x20,DEV:0x40,REV:0x131
RFIC Version         : 152
LCD Version          : TPO
Camera               : 01035602006004
Content Pack Version : Content: e3_059R1S2 V 02.03b 08-04-13 RM-840 (c) Nokia
AHNE Version         : 13
RETU Version         : PMU_MAXIM8939B
Bluetooth ID         : F4:F5:A5:E6:F4:D1
CS Type              : GSM850, GSM900, GSM1800, GSM1900, WCDMA I, WCDMA VIII

  ********** SIMLOCK INFO  ********** 
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 800000000004000B
ASIC         : 11
PROVIDER     : Default Test Operator
LOCK COUNTERS: KEYPRESS 0/3,  FBUS 0/10

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open

SIMLOCK_TYPE             : PA_SIMLOC30 (20-digit NCK)
SIMLOCK_TEST             : PASSED
SECURITY_TEST           : PASSED
SECURITY_CODE          : 42420
PHONE_MODE              : TEST
                                                
================================================
          Dynamic Camera Configuration          
================================================
DCC ID  : 01035602
DCC Ver: 006004
Status   : OK


======================================================
Selected VPL File:
RM840_059R1S2_02.03b_030.vpl
======================================================
Variant Details     : RM-840 EURO_E3_WHITE_LATIN_RO
Software Version : 02.03b
Product Type       : RM-840
Product Code      : 059R1S2
Variant Version    : 030


FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK


RESET LIFE TIMER TO : 0000:00
 OK
what's driver use for this phone...
i try flash this phone but always have driver problem ..
  Reply With Quote
 
Page generated in 0.23881 seconds with 6 queries