[mmcommunication]

Originally Posted by umesh gaba

[SOLVED] Any software problem in LAVA E-Tab Z7H Tablet

If you are facing any software problem with your tablet "LAVA Z7H / Z7H+" or it hangs at boot, no need to worry, you don't have to go to the LAVA Service Center. I am here to help you. Follow the following steps to format your tablet. It will remove everything from your tablet and make it as a new tablet like brand new tablet.)

Requirements-

1. SD Card (It will be formatted, Please backup your data)
2. SD Card Reader
3. Your PC
4. Your Tablet
5. Data Cable

Steps-

1. Download this two zip files.

Flash tool for SD card

3 link
flash tool umedia tablet.zip

Download flash tool umedia tablet zip

https://rapidshare.com/#!download|55...D9ED1E07A81946

Image file
part-1-LAVA_Z7H_S005_20120829_withoutcontent.zip.001

part-2LAVA_Z7H_S005_20120829_withoutcontent.zip.002

part-3LAVA_Z7H_S005_20120829_withoutcontent.zip.003

2. Extract the "Flash tool umedia tablet.zip".

3. Open the "PhoenixCard.exe".
4.Click on "Image File" & browse to where you have downloaded the image file "LAVA_Z7H_S005_20120829_withoutcontent.img".

5. Insert your sd card to the card reader & insert in the usb port of your PC.

6. Click on "Format to Normal", then click Burn.

7. After finished the above step completely remove the SD Card from card reader & insert it in your tablet. Make sure the tablet is off. Then power on it.
OR
Insert a small pin in the reset hole.

8. Now you can see a red progress bar moving. After it is completed the tablet will be switched off.

9. Now remove the SD Card and Turn on you tablet.

10. Bingo!! You got your new Tablet.

source : reviewonanything

Br
Umesh Gaba

thanks lot sir i done it .....

thanks lottttttttttttttt.