GSM-Forum - View Single Post - celkon a9+ pattern lock done With Power Full Box Volcano

eshwarthapa · 12-02-2013, 18:19

celcon A9+ PATTERN UNLOCK / HARD RESET

use volcano tool version 1.9.8

SELECT SPD

TICK FORMAT

SELECT AUTO DETECT PINOUTS

NOW CLICK RUN

AND THE RESULT IS................

Connecting...
Connection successful,connected state!
Version: V3.8
SN:183-846-794
Port:COM18
After format or Flash you have to press & hold power button for at least 1.30 mins.
Available Ports:COM4 COM18
Detection initiated...
Vcc: null
Gnd: 24
Analyzing D+ and D-...
D+ = 22, D- = 21
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM37), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 009800BC
FLASH LEN:0x20000000
Set to Factory successfully.

i have tried many times and it was successful.

ENJOY.

12-02-2013, 18:19	#9 (permalink)
eshwarthapa Junior Member Join Date: May 2007 Posts: 19 Member: 508303 Status: Offline Thanks Meter: 8	celcon A9+ PATTERN UNLOCK / HARD RESET use volcano tool version 1.9.8 SELECT SPD TICK FORMAT SELECT AUTO DETECT PINOUTS NOW CLICK RUN AND THE RESULT IS................ Connecting... Connection successful,connected state! Version: V3.8 SN:183-846-794 Port:COM18 After format or Flash you have to press & hold power button for at least 1.30 mins. Available Ports:COM4 COM18 Detection initiated... Vcc: null Gnd: 24 Analyzing D+ and D-... D+ = 22, D- = 21 Analyzing USB device, please wait... Find USB device:SCI USB2Serial (COM37), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. Flash ID: 009800BC FLASH LEN:0x20000000 Set to Factory successfully. i have tried many times and it was successful. ENJOY. Last edited by eshwarthapa; 12-02-2013 at 18:26.